Precision manufacturing. Redefined.
P3 DLP for end-use parts with an injection-moulding-like surface finish: up to 50 µm accuracy†, 19 validated materials and open resins through OpenAM.
† Stratasys claims: ±50 µm XY and Z for validated applications (±100 µm general); Ra up to 2 µm. Source: stratasys.com Origin Two page, read 10 Nov 2026.
Tolerances and finish for end-use parts.
Accuracy and tolerances
Up to 50 µm accuracy with projector technology.
Moulding-like finish
A patented pneumatic mechanism reduces separation forces.
Repeatability
More than 95 % of prints within ±50 µm across printers and build heads (Stratasys claim).
Heated chamber
Up to 60 °C for advanced materials.
OpenAM
Third-party and custom resins under an open material licence.
Origin Two · StratasysMaterial flexibility
Validated profiles or your own.
End-to-end workflow
Validated post-processing for production-grade results.
On-demand manufacturing
Short runs, repeatable across jobs and printers.
Origin Two at a glance
- Build volume
- 192 × 108 × 370 mm (7,672 cm³); max diagonal part length 220 mm
- Accuracy
- ±50 µm XY and Z (validated applications); ±100 µm (general)
- Surface finish
- Up to 2 µm Ra
- Light source
- DLP projector, 385 nm
- Build chamber
- Heated up to 60 °C
- Materials
- 19 Stratasys-validated materials; open materials with OpenAM
- Software
- GrabCAD Print Pro for Origin, OpenAM
Small, precise parts in production volumes.
Connectors and fine features
Moulding-quality repeatability (Stratasys: Cpk above 1.33).
Industrial components
Economical low-volume production in engineered materials.
Tooling
Jigs, fixtures and aids in hours, at 20 % of the cost (Stratasys claim).
Installation & commissioning
Site readiness checks, installation and acceptance by IME engineers.
Operator & DfAM training
Hands-on training for operators and designers, at AMIC or on-site.
Maintenance & support
Preventive maintenance, service contracts, spares and local technical support.
Other P3 DLP systems
H350
SAF powder bed fusion for cost-efficient, higher-volume production of nylon parts.
Neo800+ · Neo450s
Large-format SLA for accurate prototypes, wind-tunnel models and casting patterns. Neo450s: 450 × 450 × 400 mm.
J850 Pro
Multi-material, full-colour PolyJet for design validation and realistic prototypes.
Get Origin Two pricing and expert guidance.
Talk to a specialist about your application. We’ll walk through pricing and a test print of your own part at AMIC.