Large-format SLA, open resin, fine detail.
Open-resin stereolithography for accurate prototypes, jigs and investment-casting patterns. Neo800+ builds up to 800 × 800 × 600 mm with a 4 W laser; Neo450s fits 450 × 450 × 400 mm into a compact frame.
Source: stratasys.com Neo series and Neo450s pages, read 10 Nov 2026.
Smooth surfaces, sharp detail, any 355 nm resin.
Open resin system
Runs commercially available 355 nm SLA resins, including Somos.
Titanium software
Real-time updates, reports and remote diagnostics.
HD and SD modes (Neo450s)
Detail or speed per build.
Dynamic beam size (Neo450s)
80–750 µm, variable during the build.
Fast scanning (Neo800+)
Up to 20 m/s; up to 50 % faster builds (Stratasys claim).
Neo800+ · Neo450s · StratasysSurface quality
Smooth surfaces and accurate detail.
Less post-processing
Up to 50 % less on Neo450s (Stratasys claim).
Material freedom
Choose the resin for each job.
Neo800+ · Neo450s at a glance
- Build volume
- Neo800+: 800 × 800 × 600 mm (half vat 800 × 800 × 300) · Neo450s: 450 × 450 × 400 mm (half 200, short 50 mm high)
- Laser
- Solid-state frequency-tripled Nd:YVO4, 355 nm; Neo800+ 4 W, Neo450s 2 W
- Scan speed
- Neo800+ up to 20 m/s · Neo450s up to 10 m/s
- Layer thickness
- 50–200 µm
- Accuracy
- Under 100 mm: ±0.1 mm. Over 100 mm: ±0.15 % (Neo800+), ±0.1 % (Neo450s)
- Minimum feature
- XY 0.17 mm (Neo800+), 0.15 mm (Neo450s); Z 0.4 mm
- Materials
- Open 355 nm resin system; Somos resins recommended (e.g. WaterShed XC 11122, WaterShed AF, Taurus, EvoLVe 128, PerFORM)
- Software
- Titanium, GrabCAD, Materialise Magics; Windows 10 IoT Enterprise
- Network
- IEEE 802.3, 802.3u, 802.3ab Ethernet
- System size & weight
- Neo800+: 1,350 × 1,630 × 2,300 mm · 800 kg · Neo450s: 1,050 × 1,225 × 1,900 mm · 600 kg
- Power
- Neo800+: 208–240 V, 50/60 Hz, 1,900 W max · Neo450s: 110–120 V (550 W max) or 220–240 V (1,300 W max), 50/60 Hz
- Operating conditions
- 20–23 °C (max change ±1 °C/h), 20–50 % RH non-condensing
Accurate models, big or small.
Precision prototyping
Concept, communication and fit-and-form models.
Jigs and fixtures
Custom, lightweight tooling.
Investment casting
Master patterns, e.g. in antimony-free Somos WaterShed AF.
Installation & commissioning
Site readiness checks, installation and acceptance by IME engineers.
Operator & DfAM training
Hands-on training for operators and designers, at AMIC or on-site.
Maintenance & support
Preventive maintenance, service contracts, spares and local technical support.
Other SLA systems
Origin Two
P3 DLP for production parts with repeatable accuracy, tight tolerances and injection-moulding-like finish.
H350
SAF powder bed fusion for cost-efficient, higher-volume production of nylon parts.
J850 Prime
Multi-material, full-colour PolyJet for realistic prototypes and design models.
Get Neo800+ · Neo450s pricing and expert guidance.
Talk to a specialist about your application. We’ll walk through pricing and a test print of your own part at AMIC.