Industrial-scale printing. Simplified.
A 1,000 × 610 × 610 mm fully heated chamber, which Stratasys says is the widest in the X direction on the market†, for full-size prototypes, long fixtures and one-piece parts, with soluble support and remote monitoring.
* or ±0.002 mm/mm, whichever is greater. † Stratasys claim (T25: up to 2.3×). Source: stratasys.com F770 page, read 10 Nov 2026.
Big parts without the big-machine complexity.
Linear motors
Low-maintenance, precise gantry motion.
Three layer resolutions
Plus adaptive slice height for speed or detail.
Fully heated chamber
The widest in the X direction on the market (Stratasys claim).
Soluble support
No design-for-manufacturability limits on complex parts.
Remote monitoring
Built-in camera with GrabCAD Print and Insight.
F770 · StratasysIndustrial capability
A large build chamber for big parts.
Repeatable results
Proven Stratasys FDM technology.
Shop-floor integration
MTConnect with GrabCAD Print Pro.
F770 at a glance
- Build size
- 1,000 × 610 × 610 mm (39.4 × 24 × 24 in.), 372,000 cm³; diagonal 1,171 mm
- Accuracy
- XY ±0.254 mm or ±0.002 mm/mm; Z ±0.200 mm or ±0.002 mm/mm, plus 1 layer height (whichever is greater, 95 % dimensional yield)
- Materials
- ASA (12 colours), ABS-M30
- Support
- Breakaway and soluble FDM support
- Material delivery
- 3,277 cm³ coil box
- Software
- GrabCAD Print, GrabCAD Print Pro, Insight, Control Center, MTConnect enabled
- Network
- Wi-Fi IEEE 802.11 b/g/n
- System size & weight
- 175 × 124 × 196 cm · 658 kg
- Power
- 3-phase, 208 V, 30 A, 5-wire, 47–63 Hz
- Operating conditions
- 15–30 °C, 30–70 % RH
- Compliance
- CE, cTUVus, RCM, EAC, FCC Part B
Full-size parts in one piece.
Long prototypes, large fixtures and parts that would otherwise be printed in sections and bonded.
Full-scale prototypes
Large prototypes printed whole.
Jigs and fixtures
Tooling for the production floor.
Production parts
Low-volume and bridge-to-production parts.
Installation & commissioning
Site readiness checks, installation and acceptance by IME engineers.
Operator & DfAM training
Hands-on training for operators and designers, at AMIC or on-site.
Maintenance & support
Preventive maintenance, service contracts, spares and local technical support.
Other FDM systems
Get F770 pricing and expert guidance.
Talk to a specialist about your application. We’ll walk through pricing and a test print of your own part at AMIC.