Affordable carbon-fibre 3D printing.
Composite-ready F123 printers for carbon-fibre ABS and nylon, so strong, light jigs, fixtures and tooling can replace machined metal parts.
* or ±0.002 mm/mm, whichever is greater; Z adds ±1 layer height. Source: stratasys.com F370CR and F190CR pages, read 10 Nov 2026.
Supplement machining with carbon fibre.
Carbon-fibre materials
ABS-CF10 and FDM Nylon-CF10; the F370CR adds FDM Nylon 12CF.
Up to four layer resolutions
Choose detail or speed per job.
Hardened extrusion path
Built for abrasive carbon-fibre filaments.
Soluble support
Complex geometry without manual support removal.
GrabCAD Print and MTConnect
Job preparation and shop-floor data.
F370CR · F190CR · StratasysStrength
Stratasys says Nylon-CF10 is 67 % stronger and 190 % stiffer than its base nylon.
Cost effective
Composite and non-composite materials on one printer.
Small footprint
Fits a classroom, office or shop.
F370CR · F190CR at a glance
- Build size
- F370CR: 355 × 254 × 355 mm · F190CR: 305 × 254 × 305 mm
- Material bays
- F370CR: 2 model + 2 support · F190CR: 1 model + 1 support
- Accuracy
- ±0.200 mm or ±0.002 mm/mm, whichever is greater; Z adds ±1 layer height
- Materials
- F370CR: FDM Nylon 12CF, FDM Nylon-CF10, ABS-CF10, ASA, ABS-M30, PC-ABS, ABS-ESD7, Diran 410MF07, TPU 92A · F190CR: FDM Nylon-CF10, ABS-CF10, ASA, ABS-M30, TPU 92A
- Support
- Soluble and breakaway FDM support
- Software
- GrabCAD Print, GrabCAD Print Pro, Insight (F370CR); MTConnect enabled
- Network
- Wired 100BASE-T Ethernet (TCP/IP), RJ45; wireless-ready IEEE 802.11 b/g/n; WPA2-PSK and 802.1x EAP
- System size & weight
- 1,626 × 864 × 711 mm · 227 kg
- Power
- 100–132 V / 15 A or 200–240 V / 7 A, 50/60 Hz
- Operating conditions
- 15–30 °C, 30–70 % RH
- Compliance
- CE (low-voltage and EMC), FCC, EAC, cTUVus, KC, RoHS, WEEE, REACH, RCM
Strong, light tools that replace machined metal.
Workholding, end-of-arm tools and functional prototypes in carbon-fibre composites.
Jigs and fixtures
Strong, lightweight polymer tools in place of metal.
Rapid prototyping
Functional prototypes in composites.
Production parts
Low-volume end-use parts.
Installation & commissioning
Site readiness checks, installation and acceptance by IME engineers.
Operator & DfAM training
Hands-on training for operators and designers, at AMIC or on-site.
Maintenance & support
Preventive maintenance, service contracts, spares and local technical support.
Other FDM systems
Get F370CR · F190CR pricing and expert guidance.
Talk to a specialist about your application. We’ll walk through pricing and a test print of your own part at AMIC.