Direct-to-textile 3D printing.

3DFashion technology prints full-colour, multi-material designs straight onto fabric, garments, footwear and accessories, with up to seven materials in one job.

Get J850 TechStyle pricing Test-print at AMIC Spec sheet ↗

7Materials in one print

27Layer, µm

460×360Effective print area, mm

0.1–3.0Fabric thickness, mm

Source: stratasys.com J850 TechStyle page, read 10 Nov 2026.

Features 01

Features

Print where traditional decoration can’t.

Direct-to-textile

Prints onto fabric and finished garments.

Adhesion optimisation

Bonding tuned across fabric types.

Fabric Analyzer

Checks fabrics before production.

3D accessories

Buttons, cufflinks and clips up to 50 mm high.

Full colour and transparency

Up to seven materials at once.

J850 TechStyle · Stratasys

Benefits

Faster sampling

Tangible prototypes in hours instead of weeks (Stratasys claim).

On-demand production

Localised manufacturing with less unsold stock.

Personalisation

Custom garments and colour options.

Specifications 02

Specifications

J850 TechStyle at a glance

Download spec sheet ↗

Print area: Effective 460 × 360 mm; fabric at least 560 × 460 mm, 0.1–3.0 mm thick; interchangeable tray
Print modes: High Mix: up to 7 resins, 27 µm · High Speed: up to 3 resins, 27 µm
Accuracy: Under 100 mm: ±100 µm. Over 100 mm: ±200 µm or ±0.06 % of part length, whichever is greater (typical, rigid materials)
Materials: VeroEco Flex, Vero, VeroVivid, Agilus30 Colors
Support: SUP705 (water-jet removable), SUP705B
Software: GrabCAD Print, GrabCAD Printer Connectivity SDK
Network: LAN, TCP/IP
System size & weight: Printer 1,400 × 1,260 × 1,100 mm · 430 kg; material cabinet 1,119 × 656 × 637 mm · 153 kg; Fabric Alignment Station 91 × 81 × 215 cm · 142 kg
Power: 100–120 VAC, 50–60 Hz, 13.5 A, 1 phase; or 220–240 VAC, 50–60 Hz, 7 A, 1 phase
Operating conditions: 18–25 °C, 30–70 % RH non-condensing
Compliance: CE, FCC, EAC, RCM, R-NZ